HSM SECURIO B22 P-6 0.78x11mm Crypto Cut Shredder (1835821)
£528.00 + vat (£633.60 inc vat)
- 5 sheets per pass / 250 sheets per day
- Shreds Paper, Staples & Paperclips
- 0.78x11mm Crypto Cut / DIN Security Level P-6 for information requiring extraordinary security. More Info.
- 240mm Entry Throat (A4)
- Bin Capacity: 215 sheets - 33 litres
- Dimensions (WxDxH): 375x310x600mm
Jump to: Full Product Info
Shredder Oil & Waste Sacks for the HSM SECURIO B22 P-6
Pack of 100
Pack of 100
5 Litre Canister
The HSM SECURIO B22 1835821 is a stylish new 0.78x11mm high security, power efficient shredder which is suitable for use at the desk side or in all small offices requiring to shred paper documents and credit cards.
Special Energy Management Control System (EMCS) switches the machine into Energy Save mode automatically whilst operating all functions with one single control key. In the event of a paper jam, the HSM SECURIO B22 1835821 kicks into reverse automatically, saving operator time and effort. Alternatively, you can press the "R" button if you wish to operate the reversing function manually.
Features include an exceptionally quiet running motor for use in busy offices, a transparent front window allowing quick and easy viewing of container shredded waste capacity and level and a large waste container to extend the interval between emptying, saving time and money.
The HSM SECURIO B22 1835821 automatically switches to energy-saving mode 2 minutes after use and automatically switches on again if paper is placed in the entry throat. If not used for 4 hours the machine switches off completely eliminating all power consumption.
Warranty TermsUnlike other manufacturers, this HSM model features an on site warranty.
Upgrade ModelHSM SECURIO B24 P-6 - £565.00
DIN Security Levels
|SECURIO B22 P-6
|Paper Shred Size
|0.78x11mm Crypto Cut
|DIN 66399 Security Levels
|P-6 / F-3
|Old DIN 32757-1 Level
|Top Secret (DIN 5)
|Sheet Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted.
|240mm Entry Throat (A4)
|Shreds Staples Staples refer to standard 26/6 sized staples - never shred these through an automatic paper feeder - use the manual feed slot instead
|Shreds Paperclips Paperclips refer to standard sized paperclips - never shred these through an automatic paper feeder - use the manual feed slot instead
|Shreds Credit Cards
|Shreds Floppy Disks
|Shreds Cardboard Boxes
|Bin Capacity The number of shredded sheets that can collect in the waste bin before requiring emptying is provided for guidance purposes only. It may be necessary to push shreds down to reach capacities, and can be subject to many factors including the type, weight, size and age of paper being shredded.
|33 litres/215 sheets
|Pull Out Bin
|Waste Sack Type
|Extra Media Waste Bin
|Cutting Speed This is the optimum speed that can be achieved however please note that cutting speed can be affected by a number of factors including number of sheets shredded, how often the machine is oiled, the thickness & type of the paper etc.
|Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded.
|Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc.
|Motor Cool Down Time Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information.
|Voltage Cycle (v/Hz) Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information.
|Dimensions (WxDxH) Please note that the product dimensions provided on this website refer to the main product size and may vary slightly due to manufacturing processes. The measurements represent the core dimensions of the product and do not include any extensions or attachments, such as electrical plugs, cables, or other accessories unless explicitly stated.
|Weight Please be aware that the product weights provided on this website are approximate and are intended to give you a general idea of the item's weight. The stated weight represents the primary product without including any additional accessories, attachments, or packaging, unless explicitly mentioned.
|Machine Warranty Goods are generally covered by the standard manufacturer's warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product.
|Cutter Warranty Cutter warranties are for parts only and
do not include labour
Specifications subject to change - See Terms & Conditions for more info