Rexel Momentum Extra XP520+ Jam Free 2x15mm Micro Cut Shredder (2021520MEU)
Get £20 Cash Back - Read More
£1,099.00 + vat (£1,318.80 inc vat)
Leasing Illustration - Example Only
This model could be available for £6.44 per week
- 20 sheets per pass / 2500+ sheets per day
- Shreds Paper, Staples, Paperclips & Credit Cards
- 2x15mm Micro Cut / DIN Security Level P-5 for information of fundamental importance. More Info.
- 210mm Entry Throat (A4)
- Bin Capacity: 1300 sheets - 120 litres
- Dimensions (WxDxH): 540x540x890mm
- You MUST use Rexel branded oil with this machine otherwise you will void the warranty
Jump to: Full Product Info
Shredder Oil & Waste Sacks for the Rexel Momentum Extra XP520+ Jam Free
Pack of 50
Pack of 50
Pack of 12
Pack of 20
1 Litre Bottle
The Rexel Momentum Extra XP520+ Jam Free shredder is the ideal choice for destroying confidential documents in the office.
The XP520+ shreds each sheet into 2x15mm (DIN Level P-5) micro-cut pieces, and up to 20 sheets of A4 paper (80gsm) can go through the manual feed slot at once.
It uses active sensing technology to measure the number of sheets being fed in real-time to stop paper jams and misfeeds—indicated by a red LED on the control panel. It will not begin shredding until the number of sheets is reduced to or below the maximum sheet capacity.
This micro-cut shredder is designed for moderate to heavy use with its high sheet capacity, large 120-litre bin capacity (approx. 1300 sheets), and continuous run time.
To make the emptying process even easier, it has a pull-out bin and an infrared sensor to detect when the bin is full.
The XP520+ can shred staples and paper clips, and it also safely shreds CDs, DVDs, and credit cards through a separate feed slot.
It also functions with an ultra-quiet noise level of 55dBA.
DIN Security Levels
|Name||Momentum Extra XP520+ Jam Free|
|Paper Shred Size ||2x15mm Micro Cut|
|DIN 66399 Security Levels ||P-5|
|Sheet Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted.||20 sheets|
|Daily Capacity ||2500+ sheets|
|Throat Width||210mm Entry Throat (A4)|
|Shreds Staples Staples refer to standard 26/6 sized staples||Yes|
|Shreds Paperclips Paperclips refer to standard sized paperclips||Yes|
|Shreds Credit Cards||Yes|
|Shreds Floppy Disks||No|
|Shreds Cardboard Boxes||No|
|Bin Capacity The number of shredded sheets that can collect in the waste bin before requiring emptying is provided for guidance purposes only. It may be necessary to push shreds down to reach capacities, and can be subject to many factors including the type, weight, size and age of paper being shredded.||120 litres/1300 sheets|
|Bin Style||Cabinet Door|
|Waste Sack Type||S3|
|Extra Media Waste Bin||N/A|
|Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded.||55 dB|
|Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc.||24 hours|
|Voltage Cycle (v/Hz)||230/50|
|Machine Warranty Goods are generally covered by the standard manufacturer’s warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product.||2 years|
|Cutter Warranty Cutter warranties are for parts only and |
do not include labour
|Buyers Guide||Download Here|
Specifications subject to change - See Terms & Conditions for more info