HSM Pure 830 3.9mm Strip Cut Shredder (2380121)
£1,306.00 + vat (£1,567.20 inc vat)
Leasing Illustration - Example Only
This model could be available for £7.65 per week
- 42 sheets per pass / 2500+ sheets per day
- Shreds Paper, Staples, Paperclips, CDs/DVDs & Credit Cards
- 3.9mm Strip Cut / DIN Security Level P-2 for non-sensitive internal documents. More Info.
- 330mm Entry Throat (A4)
- Bin Capacity: 2500 sheets - 150 litres
- Dimensions (WxDxH): 579x548x953mm
Jump to: Full Product Info
Pack of 100
5 Litre Canister
The HSM Pure 830 3.9mm (2380811) is a compact strip cut document shredder designed for large workgroups and to shred correspondence of all kinds, receipts, payment documents and much more in a safe and reliable manner. Just remember that data protection begins at the desk.
These shredders are made with high quality materials and are "Made in Germany" which offers added quality and durability over models manufacturer in the far east.
The motor is powerful allowing for continuous run time and quiet during operation to minimise disruption in a shared office environment. The Pure 830 also features overload protection to try to minimise paper jams by trying to stop you from offering too much paper to the shredder.
The device will automatically switch off if pressure is applied to the safety element to avoid fingers from being injured.
Other features include a practical automatic start/stop function and a removable waste container for effortless emptying. It is also very manoeuvrable with casters attached to the bottom for ease of transport.
The solid steel cutting rollers are made of hardeneed steel and come with a lifetime warranty.
DIN Security Levels
|Paper Shred Size
|3.9mm Strip Cut
|DIN 66399 Security Levels
|P-2 / O-2 / T-2 / E-2
|Old DIN 32757-1 Level
|General (DIN 1)
|Sheet Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted.
|330mm Entry Throat (A4)
|Shreds Staples Staples refer to standard 26/6 sized staples - never shred these through an automatic paper feeder - use the manual feed slot instead
|Shreds Paperclips Paperclips refer to standard sized paperclips - never shred these through an automatic paper feeder - use the manual feed slot instead
|Shreds Credit Cards
|Shreds Floppy Disks
|Shreds Cardboard Boxes
|Bin Capacity The number of shredded sheets that can collect in the waste bin before requiring emptying is provided for guidance purposes only. It may be necessary to push shreds down to reach capacities, and can be subject to many factors including the type, weight, size and age of paper being shredded.
|150 litres/2500 sheets
|Pull Out Bin
|Waste Sack Type
|Extra Media Waste Bin
|Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded.
|Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc.
|Motor Cool Down Time Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information.
|Voltage Cycle (v/Hz) Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information.
|Dimensions (WxDxH) Please note that the product dimensions provided on this website refer to the main product size and may vary slightly due to manufacturing processes. The measurements represent the core dimensions of the product and do not include any extensions or attachments, such as electrical plugs, cables, or other accessories unless explicitly stated.
|Weight Please be aware that the product weights provided on this website are approximate and are intended to give you a general idea of the item's weight. The stated weight represents the primary product without including any additional accessories, attachments, or packaging, unless explicitly mentioned.
|Machine Warranty Goods are generally covered by the standard manufacturer's warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product.
|Cutter Warranty Cutter warranties are for parts only and
do not include labour
Specifications subject to change - See Terms & Conditions for more info