HSM Classic Nanoshred 0.7x2.6mm Crypto Cut Shredder (1674811)
The Public Sector, Schools & Registered Charities can order online & receive 30 days instant credit - Read more here
RRP: £2,755.00
Sold Out
Sold Out
Specifications
- 1 sheet per pass / 2500+ sheets per day
- Shreds Paper
- 0.7x2.6mm Crypto Cut / DIN Security Level P-7 for strictly confidential data. More Info.
- 36mm Entry Throat (Code Tapes)
- Bin Capacity: 5 litres
- Dimensions (WxDxH): 400x270x260mm
Jump to: Full Product Info
PDF Data Sheet 
Product Details
The HSM Classic Nanoshred (formerly known as the Nanoshred 726) is a special device with highest security level available for high ranked, public safety authorities. The special feed opening is designed to shred code tapes to the unofficial Din Level 6 - Maximum Security.
GDPR Compliance
The use of a P-7 shredder such as the Classic Nanoshred will aid your GDPR compliance.
DIN Security Levels
Shredders that destroy paper to Din Level P-7 are suitable for shredding strictly confidential data with the highest security precautions such as secret service or military sectors.
This shredder has been CPNI evaluated to shred the following material:
Paper
This shredder is DIPCOG® Approved to shred the following material:
Paper
Made in Germany
HSM proudly produces this document shredder in factories in Germany.
| Specifications | |
| Name | Classic Nanoshred |
| Manufacturer Code | 1674811 |
| Security | |
| Paper Shred Size | 0.7x2.6mm Crypto Cut |
| DIN 66399 Security Levels | P-7 |
| Old DIN 32757-1 Level | Maximum |
| Capacities | |
| Sheet Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 1 sheet |
| Daily Capacity | 2500+ sheets |
| Specifications | |
| Throat Width | 36mm Entry Throat (Code Tapes) |
| Shreds Paper | Yes |
| Shreds Staples Staples refer to standard 26/6 sized staples | No |
| Shreds Paperclips Paperclips refer to standard sized paperclips | No |
| Shreds CDs/DVDs/Blu-Ray | No |
| Shreds Credit Cards | No |
| Shreds Floppy Disks | No |
| Shreds Cardboard Boxes | No |
| Waste Bin | |
| Bin Capacity The number of shredded sheets that can collect in the waste bin before requiring emptying is provided for guidance purposes only. It may be necessary to push shreds down to reach capacities, and can be subject to many factors including the type, weight, size and age of paper being shredded. | 5 litres |
| Bin Style | Pull Out Bin |
| Extra Media Waste Bin | N/A |
| Technical | |
| Cutting Speed This is the optimum speed that can be achieved however please note that cutting speed can be affected by a number of factors including number of sheets shredded, how often the machine is oiled, the thickness & type of the paper etc. | 5.4 metres/min |
| Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded. | 53 dB |
| Motor | 295 watts |
| Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc. | 24 hours |
| Motor Cool Down Time | N/A |
| Voltage Cycle (v/Hz) | 230/50 |
| General | |
| Dimensions (WxDxH) | 400x270x260mm |
| Weight | 12kg |
| Warranty | |
| Machine Warranty Goods are generally covered by the standard manufacturer’s warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product. | 2 years |
| Cutter Warranty Cutter warranties are for parts only and do not include labour | 2 years |
| Downloads | |
| Buyers Guide | Download Here  |
| Instruction Manual | Download Here |
| HSM CPNI Approved Models | Download Here |
Specifications subject to change - See Terms & Conditions for more info
Information
* UK Registered Only
