JBF 38-50HD 6mm Hard Drive Static Disintegrator 6mm Particles Shredder (JBF38-50HD6)

The Hard Drive Shredder JBF 38-50HD has been especially designed to completely destroy Hard Drives and Discs and other media initially to 30mm pieces, and then continue to grind down to as small as 6mm particles meeting the most stringent requirements for Secret and Top Secret Destruction. The JBF 38-50HD is a flexible Shredder/Disintigrator with various possibilities of feeding and exiting of all types of Media Products. It is designed for high throughput with a cutting zone of approx. 380 x 540 mm. The hard wearing knives continuously cut drives until the product is small enough to fall through a hardened granulation screen of a defined size for absolute security destruction.

The JBF 38-50HD can be equipped with a variety of screen sizes (14mm, 12mm, 10mm, 8mm & 6mm - plus other sizes available) which can be interchanged using a forklift or optional Mobile Lifting Table. Exchanging the screen for one with smaller perforations means you can adapt the final shred size of the disintegrator in a few minutes. Please note only the 6mm screen is NPSA evaluated to shred hard drives to DIN Security Level H-5.

The number of standard 3.5" HDD's shredded per hour is dependent on screen size used:

14mm Screen: practical throughput is 80 HDDs per hour

12mm Screen: practical throughput is 50 HDDs per hour

10mm Screen: practical throughput is 30 HDDs per hour

8mm Screen: practical throughput is 22 HDDs per hour

6mm Screen: practical throughput is 20 HDDs per hour

The Shredding unit consists of a robust steel support frame, designed to accept a standard 120 litre wheelie bin with optional conveyor feed and exit available. Two slow revolving shafts offer low-noise and low wear, this low RPM eliminates the risk of spontaneous combustion.

The cutting shafts can be individually changed and re-sharpened and the cutters are made of hard wearing hardened steel. The connection between shafts and knives is by means of extra strong multi-key latching and a split cutting block which allows the complete knife shafts to be lifted out of the housing for quick exchange. A High Torque 4kW motor is fitted as standard to run at 12 revolutions per minute to avoid sparking. Safety limit switches on the doors and hopper prevent any unauthorised operation of the shredder and each model features an Emergency Stop button.

The 38-50HD Standard Unit is designed as a static destruction device with a 120 litre waste collection bin but it is also available as a mobile unit which can be mounted on a suitable vehicle (See JBF 38-54 HD Mobile Unit for more info).

Please note that due to the nature of this product and the requirement to shred Metal parts the Guarantee does not include general wear and tear. Magnetic parts require removal on a weekly basis and units should be placed under a Preventative Maintenance Contract.

Warranty Terms

Standard Warranty is 6 months from date of delivery for non-wear and tear parts in a one-shift operation or 1,000 working hours. Normal wear and tear of the knives and screens is excluded from the warranty and is subject to the manufacturers operating instructions. Inappropriate use of the machine would include but is not limited to improper installation, commissioning, set-up, operation or servicing of the machine. The machine was designed for safe operation by trained and instructed staff only and is not designed to be used by children. No other work may be performed on the machine during cleaning or servicing. The warranty will be void in the event of incorrect installation, start-up, set-up, maintenance; unauthorised physical/structural modification of the machine; unauthorised intervention into the control system; emplacement and use of unapproved components and spare parts; faulty repairs by non-trained and authorized personnel.

 Read More   Read Less 