Leitz IQ Autofeed 150 Shredder - P4 4x28mm Cross Cut Shredder (80131000)
Video Gallery
Get £25 Cash Back
Offer Expires: 30/06/2024
RRP: £935.36
- You Save: £592.36 (63%)
£343.00 + vat (£411.60 inc vat)
£343.00 + vat (£411.60 inc vat)
In Stock.
FREE
GB Mainland
1-3 Day
Delivery
Specifications
- 150 Sheet Auto Feeder
- 8 sheets per pass via the standard entry throat
- Shreds Paper, Staples, Paperclips & Credit Cards
- 4x28mm Cross Cut / DIN Security Level P-4 for sensitive, confidential & personal data. More Info.
- 220mm Entry Throat (A4)
- Bin Capacity: 495 sheets - 44 litres
- Dimensions (WxDxH): 431x364x617mm
Jump to: Full Product Info
Shredders Buyers GuideShredder Oil & Waste Sacks for the Leitz IQ Autofeed 150 Shredder - P4
£18.95 (x1)
£34.12 (x2)
£75.80 (x5)
£34.12 (x2)
£75.80 (x5)
(All + vat)
Product Details
Fully automatic paper shredder from Leitz with unique clean emptying feature. So intelligent it quietly works on its own, just insert your stack of papers (incl. staples & paper clips), close the lid and get on with your day. Ideal for office use. Confidential security and excellent performance with this anti jam, quiet and long running (30 min) autofeed shredder. Automatically shred 150 sheets of A4 into security P4 (4x28mm) cross cut pieces in one go into the generous 44L bin. Simple operation using touch controls.
Autofeed feature for 150 sheets of A4, manual slot for up to 8 sheets (80 gsm)
Unique clean empty feature (cutters reverse after every use) to prevent paper shreds dropping behind the bin when pulled out
Infra red bin full sensor as well as 80% full warning to alert user to empty the bin to avoid mess
Ultra quiet operation - for a calm working environmemt (when using Leitz oil papers regularily)
Anti jam technology for uninterrupted shredding - automatically stops and reverses the paper out when too much paper is inserted
Continuous 30 min run time allowing the full chamber to be shredded in one go, ECO sleep mode activates after 3 minutes of non use
Security DIN P4 cross cut (4x28mm)
Generous 44L capacity pull out bin allowing the full chamber to be shredded
Touch-Control - simple and intuitive for easy operation
Also shreds credit cards, staples and paper clips
365 (w) x 618 (h) x 430 (d)
2+1 years guarantee (also on cutters) - register to get your extra year
Warranty Terms
Warranty period applies to all purchases and becomes valid once the product has been registered via the Leitz website. Full details will be provided in the box with your shredder.
GDPR Compliance
The use of a P-4 shredder such as the IQ Autofeed 150 Shredder - P4 will aid your GDPR compliance.
DIN Security Levels
Shredders that destroy paper to Din Level P-4 are suitable for shredding sensitive and confidential data, as well as personal data such as payslips, personal data/files, contracts, medical reports and tax documents.
Extended 3 Year Warranty
Leitz are so confident of the durability of this machine that they have upgraded the warranty to 3 years (subject to product registration)
| Specifications | |
| Name | IQ Autofeed 150 Shredder - P4 |
| Manufacturer Code | 80131000 |
| Security | |
| Paper Shred Size | 4x28mm Cross Cut |
| DIN 66399 Security Levels | P-4 |
| Capacities | |
| Auto Feed Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 150 sheets |
| Sheet Capacity (70gsm) All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 165 sheets |
| Normal Throat Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 8 sheets per pass |
| Daily Capacity | 250 sheets |
| Specifications | |
| Throat Width | 220mm Entry Throat (A4) |
| Shreds Paper | Yes |
| Shreds Staples Staples refer to standard 26/6 sized staples - never shred these through an automatic paper feeder - use the manual feed slot instead | Yes |
| Shreds Paperclips Paperclips refer to standard sized paperclips - never shred these through an automatic paper feeder - use the manual feed slot instead | Yes |
| Shreds CDs/DVDs/Blu-Ray | No |
| Shreds Credit Cards | Yes |
| Shreds Floppy Disks | No |
| Shreds Cardboard Boxes | No |
| Waste Bin | |
| Bin Capacity The number of shredded sheets that can collect in the waste bin before requiring emptying is provided for guidance purposes only. It may be necessary to push shreds down to reach capacities, and can be subject to many factors including the type, weight, size and age of paper being shredded. | 44 litres/495 sheets |
| Bin Style | Pull Out Bin |
| Waste Sack Type | S1 |
| Extra Media Waste Bin | N/A |
| Technical | |
| Cutting Speed This is the optimum speed that can be achieved however please note that cutting speed can be affected by a number of factors including number of sheets shredded, how often the machine is oiled, the thickness & type of the paper etc. | 1.8 metres/min |
| Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded. | 55 dB |
| Motor | 300 watts |
| Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc. | 30 mins |
| Voltage Cycle (v/Hz) Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information. | 230/50 |
| General | |
| Dimensions (WxDxH) Please note that the product dimensions provided on this website refer to the main product size and may vary slightly due to manufacturing processes. The measurements represent the core dimensions of the product and do not include any extensions or attachments, such as electrical plugs, cables, or other accessories unless explicitly stated. | 431x364x617mm |
| Weight Please be aware that the product weights provided on this website are approximate and are intended to give you a general idea of the item's weight. The stated weight represents the primary product without including any additional accessories, attachments, or packaging, unless explicitly mentioned. | 15.3kg |
| Warranty | |
| Machine Warranty Goods are generally covered by the standard manufacturer's warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product. | 3 years |
| Cutter Warranty Cutter warranties are for parts only and
do not include labour |
3 years |
| Downloads | |
| Buyers Guide | Download Here
 |
| Instruction Manual | Download Here
|
Specifications subject to change - See Terms & Conditions for more info
Information
* UK Registered Only
