Optimax OP316 Mats Packaging Shredder (OP-316)

The Optimax OP316 Cardboard Carton Shredder allow you to recycle your waste cardboard boxes, which helps to protect our environment and save money by not having to purchase additional chips or bubble wrap, and reducing costs of skip removal or the compacting of old cartons.

The OP316 Shredder is a single-phase unit that plugs into a standard 13amp socket, and shreds card products of up to 320mm wide and up to 12mm thick at a rate of 10 metres per minute, making flexible lattice matting which can then be used to void-fill or product protect a host of items on demand. The OP316 produces 1-2m3 per hour of void-fill with a recommended maximum run time of up to 6 hours, and a footprint less than 0.5sq.m. The unit also incorporates a cutting system so in a single pass the machine simultaneously cuts and processes the cardboard therefore trimming and shredding pieces to a given size – perfect for your individual items.

Safer, Cleaner and Quieter, this Optimax Cardboard Shredder is CE/EMC compliant and built to class IE3 energy efficiency, which is up to 30% more energy efficient, using less electricity for the same performance. Soft start means less component wear and quieter operation. Optimax Cardboard Shredders are the first to comply with BS EN ISO 13857:2008. The standard stipulates that a 20mm-high opening to a blade mechanism must incorporate a minimum safety distance of 120mm - Optimax, a market leader in innovation and operator safety, has exceeded these requirements to provide a safety distance of 140mm.

These machines are fitted with a power inverter as required by the IEC3 Premium Efficiency standard – it is not recommended to connect them to a power circuit protected by an RCD or RCBO device, as this may cause nuisance tripping. If connection to a protected circuit is unavoidable we suggest the use of a Type B protection device, although this still may not completely eliminate the tripping but will reduce it.

Please note that whilst these machines will shred staples Optimax recommends customers remove them where possible as it will increase the wear on the cutting head and therefore shorten the life of the machine. Furthermore, most users will want to remove the staples anyway as if you are using these for packaging materials then any staples left behind may scratch the goods. The shredding of non-paper and cardboard materials like plastic tapes and strapping may damage your machine and negate your warranty.

Supplied with manufacturers 2 year return to base warranty and available with a leasing options if required to spread the cost of the purchase

Warranty Terms